Hi,
We have several cisco small business switches that we would like to get backed up. The error we are seeing after adding the first switch and running a config back up
"did not receive command prompt after connecting via SSH"
Any recommendations on what we are missing are greatly appreciated.
When connecting via SSH we are seeing the following prompts
Thanks
I'm currenlty having issues while in Web Access with fetching events. Sometimes I'm able to go from page to page just fine and other times I'm receiving "The request to the server timed out." I also receive the time out message when attempting to filter my logs. I'm currently running 1 Kiwi Syslog server on a Windows 2k3 server using SQL Server 2005 Express on a ESX server and have 4GB of RAM allocated to this machine along with 4 processor cores. There are 30 servers forward their log subscriptions to my Syslog server. The rest of the syslog server works great except for the Web Access portion timing out. Any ideas?
Hi chaps,
I'm struggling a little to get the Generic.Device with Variations to work correctly when trying to back up my PFSense Firewall.
Here is the contents of my variations file:
DEVICE_PRIVILEGEDPROMPT = "):"
DEVICE_INVALIDCOMMAND = "% Command not found."
COMMAND_DISABLEPAGING = ""
COMMAND_ENABLEPAGING = ""
COMMAND_RUNNINGCONFIG = "cat /conf/config.xml"
COMMAND_STARTUPCONFIG = "cat /conf/config.xml"
COMMAND_DISCONNECT = "exit"
RESPONSE_STRIP_VT100ESC = "1"
RESPONSE_STRIP_ANSICHARS = "1"
RESPONSE_STRIP_NULLS = "1"
Sanitised Info Log:
2015-01-06 10:58:54 3-Info 0 CatTools Service Performing activity - Run Now
2015-01-06 10:58:54 3-Info 0 CatTools Service Loading activity: Device.Backup.Running Config - MT PFSense. Schd: 4
2015-01-06 10:58:54 4-Debug 0 CatTools Service Marshaller - Running script. Device: Firewall
2015-01-06 10:58:54 3-Info 1 Firewall Loading variations for C:\Program Files (x86)\CatTools3\Variations\C4L_Management_FW.txt
2015-01-06 10:58:54 3-Info 1 Firewall Variations function found
2015-01-06 10:58:54 4-Debug 1 Firewall SSH Fingerprint: ################################
2015-01-06 10:58:55 4-Debug 1 Firewall Connected to 192.168.1.254
2015-01-06 10:58:55 4-Debug 1 Firewall Login Generic Device: Firewall
2015-01-06 10:58:55 4-Debug 1 Firewall Waiting for command prompt
2015-01-06 10:58:55 4-Debug 1 Firewall DeviceHostnameID: [2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1
2015-01-06 10:58:55 4-Debug 1 Firewall Login to Firewall was successful
2015-01-06 10:58:55 4-Debug 1 Firewall Skipping enter enable mode as we are already in enable mode
2015-01-06 10:58:55 4-Debug 1 Firewall Waiting for an echo of cat /conf/config.xml command
2015-01-06 10:59:25 1-Error 1 Firewall Did not receive echo of cat /conf/config.xml command
2015-01-06 10:59:25 4-Debug 1 Firewall Did not receive echo of cat /conf/config.xml
2015-01-06 10:59:25 3-Info 1 Firewall Backup Running Config results: Failed
2015-01-06 11:00:26 4-Debug 1 Firewall Disconnecting from Firewall
2015-01-06 11:00:26 4-Debug 1 Firewall Disconnected from 192.168.1.254
2015-01-06 11:00:26 3-Info 0 CatTools Service Stopping Activity.
2015-01-06 11:00:26 3-Info 0 CatTools Service All threads have finished. Now processing results...
2015-01-06 11:00:26 3-Info 0 CatTools Service Run Now activity has completed
Debug:
I've snipped the output of the config on line 21 to remove anything sensitive but you get the idea.
<NEWSESSION CatTools 3.10.0 06/01/2015 10:58:54>
<PROTOCOL=SSH2>
<DEVICE TYPE=Generic.Device>
<ACTIVITY TYPE=Device.Backup.Running Config>
<ACTIVITY SCRIPT=C:\Program Files (x86)\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>
<USERS NAME FOR DEVICE=C4L Management FW>
<C OK 10:58:55>
<R-10:58:55>Last login: Tue Jan 6 10:51:12 2015 from 192.168.10.35[13][13][10]Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994[13][10][09]The Regents of the University of California. All rights reserved.[13][10][13][10][2.1.5-RELEASE][cattools@bgmcfw2.bchosting.co.uk]/home/cattools(1):
<W-10:58:55>[13]
<R-10:58:55>[13][13][10][2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1):
<W-10:58:55>[13]
<R-10:58:55>[13][13][10][2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1):
<W-10:58:55>cat /conf/config.xml
<R-10:58:55>cat /conf/co [08]nfig.xml
================================================================================
WFDRetVal=0. Waiting for: "cat /conf/config.xml"
WFDBuffer="cat /conf/co [08]nfig.xml"
================================================================================
<W-10:59:25>[13]
<R-10:59:25>[13][13][10]<?xml version="1.0"?>[13][10]<pfsense>[13][10][09]<version>10.1</version>[13][10][09]<lastchange/>[13][10][09]<theme>pfsense_ng</theme>[13][10][09]<sysctl>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Enable mounting the FS read only with more checks.]]></descr>[13][10][09][09][09]<tunable>vfs.forcesync</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Disable the pf ftp proxy handler.]]></descr>[13][10][09][09][09]<tunable>debug.pfftpproxy</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Increase UFS read-ahead speeds to match current state of hard drives and NCQ. More information here: http://ivoras.sharanet.org/blog/tree/2010-11-19.ufs-read-ahead.html]]></descr>[13][10][09][09][09]<tunable>vfs.read_max</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Set the ephemeral port range to be lower.]]></descr>[13][10][09][09][09]<tunable>net.inet.ip.portrange.first</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Drop packets to closed TCP ports without returning a RST]]></descr>[13][10][09][09][09]<tunable>net.inet.tcp.blackhole</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Do not send ICMP port unreachable messages for closed UDP ports]]></descr>[13][10][09][09][09]<tunable>net.inet.udp.blackhole</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Randomize the ID field in IP packets (default is 0: sequential IP IDs)]]></descr>[13][10][09][09][09]<tunable>net.inet.ip.random_id</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Drop SYN-FIN packets (breaks RFC1379, but nobody uses it anyway)]]></descr>[13][10][09][09][09]<tunable>net.inet.tcp.drop_synfin</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Enable sending IPv4 redirects]]></descr>[13][10][09][09][09]<tunable>net.inet.ip.redirect</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Enable sending IPv6 redirects]]></descr>[13][10][09][09][09]<tunable>net.inet6.ip6.redirect</tunable>[13][10][09][09][09]<value>default</value>[13][10][09][09]</item>[13][10][09][09]<item>[13][10][09][09][09]<descr><![CDATA[Enable privacy settings for IPv6 (RFC 4941)]]></descr>[13][10][09][09][09]
<snip>
</pfsense>[13][10][2.1.5-release][cattools@firewall.local]/home/cattools(2): "
================================================================================
WFMDRetVal=1 Waiting for: "[2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1>"
WFMDRetVal=2 Waiting for: "[2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1):"
WFMDRetVal=3 Waiting for: "[2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1("
WFMDRetVal=4 Waiting for: "(config)"
WFMDBuffer="[13][13][10][2.1.5-release][cattools@firewall.local]/home/cattools(2): "
================================================================================
<W-11:00:26>exit[13]
<D 11:00:26>
<SCRIPT VALUES>
<HOSTNAME="[2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1">
<PROMPT VTY="[2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1>">
<PROMPT ENABLE="[2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1):">
<PROMPT CONFIG="[2.1.5-RELEASE][cattools@firewall.local]/home/cattools(1(">
Any thoughts how I can clean up the output so the output/config is retrieved correctly?
Thanks,
Martyn
Dear Sir
I am new to KIWIcat tool, first time I have installed this tool to integarate with cisco asa for backup purpose. We manage around 100 cisco asa firewall and used to take manual backup. So we want to convert this process automatically with the help of kiwicat tool. However I am getting error message while take backup through tool which is listed below.
Reason (30012) Protocol version mismatch error.. Giving up after 3 connection attempts"
Could you please let me know if I have wrongly configured this or having this error due to any other reason.
Version of tool is 3.6.0 which I believe is latest one.
Please let me know if you require any other information to dig out the problem.
Thanks in advance
Greetings,
I'm attempting to backup our devices that are accessible via a Linux server and according to the CatTools help section, sited bellow, under "Connect via" this should be achievable:
For example, if your device is behind an access list, but a Linux box has access to that device, you can connect via the Linux box first, then launch a telnet or SSH session to the destination device from there.
So looks like this: http://i.imgur.com/IFoVOYz.png
And it's obvious looking at the debug log that when the back connects to the Linux server there are no issue, it's from the Linux to the Cisco device there is an issue and it appear that issue is with the ssh command it's passing:
-8:55:20 PM>ssh -2 -l x.x.x.x
<R-8:55:20 PM>ssh -2 -l x.x.x.x
<W-8:55:20 PM>[13]
<R-8:55:20 PM>[13][10]usage: ssh [-1246AaCfgKkMNnqsTtVvXxYy] [-b bind_address] [-c cipher_spec][13][10]
<W-5:41:52 PM>ssh -2 -l x.x.x.x
<R-5:41:52 PM>ssh -2 -l x.x.x.x
<W-5:41:52 PM>[13]
It's attempting to use a Cisco ssh command and not a a Linux/Bash ssh syntax which looks like this username@<IP Address>
Am I missing something in the config?
Thanks for your suggestions.
I am receiving the following message from a newly installed Riverbed Router. Any ideas?
2013-10-05 23:15:17 2-Warning 6 Riverbed-Router Failed to connect to Riverbed-Router. Reason: (30044) No available encryption algorithms match with the server.. Will try again.
Running ERS 4900 swtich stacks with CatTools. Everything was working great for awhile until we needed to upgrade one of our stacks from version 7.2.0.009 to 7.6.0.007 due to an unrelated issue. Now when the backup is being performed in CatTools I get this error: Failed to connect. Reason: (30044) No Available encryption algorithms match with the sever..
Here is the full error log:
<NEWSESSION CatTools 3.6.0 10/22/2018 12:35:51 PM>
<PROTOCOL=SSH2>
<DEVICE TYPE=Cisco.Router.General>
<ACTIVITY TYPE=Device.CLI.Send commands>
<ACTIVITY SCRIPT=C:\Program Files (x86)\CatTools3\Scripts\Client.Device.CLI.Send commands.txt>
<USERS NAME FOR DEVICE=m4900sc129>
<C Err=No available encryption algorithms match with the server. 12:35:51 PM><D 12:35:51 PM>
<SCRIPT VALUES>
<HOSTNAME="m4900dc2">
<PROMPT VTY="m4900dc2>">
<PROMPT ENABLE="m4900dc2#">
<PROMPT CONFIG="m4900dc2(">
The switch is definitely running SSH. I did notice that connecting directly with the 'Telnet/SSH' button from the devices menu did not work and had a similar error. To resolve this, I had to update PuTTY to the newest version. Now that PuTTY is updated, this option now works however, i am still getting the same error with CatTools.
Any help is appreciated! Thanks!
I am attempting to configure Cat Tools to backup some of our Dell PowerConnect 5548s running-configs over SSH, however I am running into problems when initiating the SSH session. Since the Dell SSH on the appliance is built on top of Telnet, it prompts for a useless field "Login as:" before asking for the local username and password. This first field has no effect on whether or not you can authenticate to the device.
I cannot find a way to put in a carriage return or line-feed command to make the session continue to the "Username: " prompt.
I apologize for my sentence structure on this post.
Cheers,
Stefan
Hi, We have just installed some extreme switches and currently
it is backing up using model X450-24X running the show configuration command.
We are wanting to run the following below command and wondered whether this
would be possible if we had a variations file and running a TFTP server on
server where cat tools is installed.
tftp put x.x.x.x vr "VR-Default"primary.cfg **Saved file name***.cfg
The above command makes it easier to restore configs if we were to have issues.
We tried running Device.Backup.TFTP activity but it currently only supports Cisco Devices.
Thanks
Hello everybody.
I've set up tftp backups of some of my Fortigate firewalls. The first backup runs OK, but the subsequent ones will fail because of "Error code 2: Access violation". I've played a bit with it and it seems that it cannot overwrite the already existing backup file in the TFTP folder.
Anybody knows how to solve this?
The Kiwi CatTools Service is run by "Local System account".
Any help will be appreciated.
Thanks and regards,
F.
Greetings,
I'm attempting to backup our devices that are accessible via a Linux server and according to the CatTools help section, sited bellow, under "Connect via" this should be achievable:
For example, if your device is behind an access list, but a Linux box has access to that device, you can connect via the Linux box first, then launch a telnet or SSH session to the destination device from there.
So looks like this: http://i.imgur.com/IFoVOYz.png
And it's obvious looking at the debug log that when the back connects to the Linux server there are no issue, it's from the Linux to the Cisco device there is an issue and it appear that issue is with the ssh command it's passing:
-8:55:20 PM>ssh -2 -l x.x.x.x
<R-8:55:20 PM>ssh -2 -l x.x.x.x
<W-8:55:20 PM>[13]
<R-8:55:20 PM>[13][10]usage: ssh [-1246AaCfgKkMNnqsTtVvXxYy] [-b bind_address] [-c cipher_spec][13][10]
<W-5:41:52 PM>ssh -2 -l x.x.x.x
<R-5:41:52 PM>ssh -2 -l x.x.x.x
<W-5:41:52 PM>[13]
It's attempting to use a Cisco ssh command and not a a Linux/Bash ssh syntax which looks like this username@<IP Address>
Am I missing something in the config?
Thanks for your suggestions.
Hi Thwack community,
this is my first discussion
We are having some troubles with "Checkpoint Security Gateway" Devices. Because there is no suitable Device-Template for those devices i used the Generic.Device combined with a Device Variation to backup the Running Configuration.
Device Details: Check Point Security Gateway using Gaia R77.20 as OS, Kiwi Cattools 3.6.0
I always try to copy the manual steps i would do via putty/SSH to cattools. Those manual steps would be:
Somehow cattools is having some problems with those steps :/
It isn´t getting input from the "show configuration" command which should print to stdout "Did not receive echo of show configuration command".
I attached you the log-info File and the Device variations so you could get a look into the changes i made.
Has anyone ever had similar problems (and a solution to it)? Especially with Checkpoint Devices?
Best regards,
Max
Trying to setup Enterprise DLink switch device configuration backup. Using SSHv2, when I manually launch SSH from the device profile I am able to login, when the script runs we get that error.
Hello,
I am pretty new in Kiwi CatTools so don't expect much.
The switch i wanted to back-up is the Cisco.SmallBusiness SF-300-24PP.
I keep getting this error;
'' Did not receive command prompt after connecting via SSH ''
Running ERS 4900 swtich stacks with CatTools. Everything was working great for awhile until we needed to upgrade one of our stacks from version 7.2.0.009 to 7.6.0.007 due to an unrelated issue. Now when the backup is being performed in CatTools I get this error: Failed to connect. Reason: (30044) No Available encryption algorithms match with the sever..
Here is the full error log:
<NEWSESSION CatTools 3.6.0 10/22/2018 12:35:51 PM>
<PROTOCOL=SSH2>
<DEVICE TYPE=Cisco.Router.General>
<ACTIVITY TYPE=Device.CLI.Send commands>
<ACTIVITY SCRIPT=C:\Program Files (x86)\CatTools3\Scripts\Client.Device.CLI.Send commands.txt>
<USERS NAME FOR DEVICE=m4900sc129>
<C Err=No available encryption algorithms match with the server. 12:35:51 PM><D 12:35:51 PM>
<SCRIPT VALUES>
<HOSTNAME="m4900dc2">
<PROMPT VTY="m4900dc2>">
<PROMPT ENABLE="m4900dc2#">
<PROMPT CONFIG="m4900dc2(">
The switch is definitely running SSH. I did notice that connecting directly with the 'Telnet/SSH' button from the devices menu did not work and had a similar error. To resolve this, I had to update PuTTY to the newest version. Now that PuTTY is updated, this option now works however, i am still getting the same error with CatTools.
Any help is appreciated! Thanks!
Device Type is Cisco.SmallBusiness
AAA Username and Password are set.
Initial login requires username and login is checked.
I can telnet into the device with no issue.
Current Error: Failed to connect to "IP" Reason: (10060) The current connection has timed out..Giving up after 3 connection attempts.
Hi,
i'm having issues backing up my Extreme Networks B5 switch with Device.Backup.Running.Config script.
Here is the debug file :
<NEWSESSION CatTools 3.11.2 26/07/2017 11:37:19>
<PROTOCOL=SSH2>
<DEVICE TYPE=Extreme.Switch.General>
<ACTIVITY TYPE=Device.Backup.Running Config>
<ACTIVITY SCRIPT=C:\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>
<USERS NAME FOR DEVICE=switch-nsi-intersite-relecq>
<C OK 11:37:20>
<R-11:37:20>[13][10][13][10]Extreme B5 [13][10]Command Line Interface [13][10][13][10]Extreme Networks, Inc. [13][10]9 Northeastern Boulevard[13][10]Salem, NH 03079 U.S.A. [13][10][13][10]Phone: +1 603 952 5000 [13][10]E-mail: support@enterasys.com [13][10]WWW: http://www.extremenetworks.com [13][10][13][10](c) Copyright Extreme Networks, Inc. 2014[13][10][13][10]
<R-11:37:20>Chassis Serial Number: 15060732916E[13][10]Chassis Firmware Revision: 06.71.05.0008[13][10][13][10]Last successful login : WED JUL 26 11:24:37 2017[13][10]Failed login attempts since last login : 0[13][10][13][10]Stack Enterasys Baie Schelter Relecq intersite vers Gouesnou[13][10]switch-nsi-intersite-relecq(su)->
<W-11:37:22>[13]
<R-11:37:22>[13][10]switch-nsi-intersite-relecq(su)->
================================================================================
WFMDRetVal=1 Waiting for: " #"
WFMDRetVal=2 Waiting for: " >"
WFMDBuffer="[13][10]switch-nsi-intersite-relecq(su)->"
================================================================================
Device configuration :
Info Log reports :
Can you help me figure out how to get past this ?
Do i have to change the prompt options ?
thanks in advance
I've just grabbed a copy of CatTools for eval to backup our switch configurations periodically. Cattools seems to login correctly, but doesn't recognise that its logged in?
I've tried entering various objects in the VTY and Enable prompt fields, but I cant get this to continue and run the backup, any idea? Log is as follows;
<NEWSESSION CatTools 3.11.5 20/08/2019 10:53:25>
<PROTOCOL=SSH2>
<DEVICE TYPE=HP.Switch.Others>
<ACTIVITY TYPE=Device.Backup.Running Config>
<ACTIVITY SCRIPT=C:\Program Files (x86)\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>
<USERS NAME FOR DEVICE=B_CORE>
<C OK 10:53:26>
<R-10:53:26>[10]===========================================================================[10][10]PROPRIETARY INFORMATION[10][10]All content of this system and its associated sub-systems are PROPRIETARY[10]INFORMATION and remain the sole and exclusive property of this company.[10]This system may be accessed and used by authorized personnel only.[10]Authorized users may only perform authorized activities and may not exceed[10]the limits of such authorization. Disclosure of information found in this[10]system for any unauthorized use is *STRICTLY PROHIBITED*. All activities on[10]this system are subject to monitoring. Intentional misuse of this system[10]can result in disciplinary action or criminal prosecution.[10][10]===========================================================================[10][10][10]
<R-10:53:27>[27][1;23r[27][1;1H
<R-10:53:27>[27][?6l[27][1;24r[27][?7l[27][2J[27][1;1H[27][1920;1920H[27][6n[27][1;1HYour previous successful login (as manager) was on 2019-08-20 09:47:53 [13][10] from 10.10.2.10[13][10][27][1;24r[27][24;1H[27][24;1H[27][2K[27][24;1H[27][?25h[27][24;1H[27][24;1HProbrand/Bham/Core/1200# [27][24;1H[27][24;26H[27][24;1H[27][?25h[27][24;26H
================================================================================
WFMDRetVal=1 Waiting for: ">"
WFMDRetVal=2 Waiting for: "]"
WFMDRetVal=3 Waiting for: "login as:"
WFMDRetVal=4 Waiting for: "Password"
WFMDRetVal=5 Waiting for: "ress any key to continue"
WFMDBuffer="[10]===========================================================================[10][10]proprietary information[10][10]all content of this system and its associated sub-systems are proprietary[10]information and remain the sole and exclusive property of this company.[10]this system may be accessed and used by authorized personnel only.[10]authorized users may only perform authorized activities and may not exceed[10]the limits of such authorization. disclosure of information found in this[10]system for any unauthorized use is *strictly prohibited*. all activities on[10]this system are subject to monitoring. intentional misuse of this system[10]can result in disciplinary action or criminal prosecution.[10][10]===========================================================================[10][10][10][27][1;23r[27][1;1h[27][?6l[27][1;24r[27][?7l[27][2j[27][1;1h[27][1920;1920h[27][6n[27][1;1hyour previous successful login (as manager) was on 2019-08-20 09:47:53 [13][10] from 10.10.2.10[13][10][27][1;24r[27][24;1h[27][24;1h[27][2k[27][24;1h[27][?25h[27][24;1h[27][24;1hprobrand/bham/core/1200# [27][24;1h[27][24;26h[27][24;1h[27][?25h[27][24;26h"
================================================================================
Any help would be much appreciated!
When I try to run a job on my Cisco WLC's using Device.Backup.TFTP I receive no error, but when I go to the directory where the backups should be I find no files.
I tried running a Device.CLI.Send.Commands and I received the following error: "Aborting command entry due to command error". The command i tried running was "show run".
Also this process used to work, but now all of a sudden it stopped working.
KiwiCat tools version 3.4
WLC IOS 7.0.230.0
Thanks for your help in advance.
Paul
We are running CaTTools 3.11 for backing up several of our Cisco switches and it is working great. However, we also have a bunch of HP switches that we are also trying to use CaTTools with but I'm having trouble getting it working...
Started trying on a HP J9827a switch with 4 cards in it.
I've messed around with the different HP switch options including "other" and the variations...
From the debug log it looks to me like its dumping all the commands early not waiting for the prompts. How do I make it wait for the appropriate parts?
we dont have logins setup and that is all unchecked in the setup...
What am I missing? (debug below)
<NEWSESSION CatTools 3.11.2 6/7/2018 3:09:58 PM>
<PROTOCOL=Telnet>
<DEVICE TYPE=HP.Switch.2500>
<ACTIVITY TYPE=Device.Backup.Running Config>
<ACTIVITY SCRIPT=C:\Program Files (x86)\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>
<USERS NAME FOR DEVICE=Building M Old Computer Room HP 48 port>
<C OK 3:09:58 PM>
<R-3:09:59 PM>HP J9850A Switch 5406Rzl2[13][13][10]Software revision KB.16.05.0004[13][13][10][13][13][10] (C) Copyright 2017 Hewlett Packard Enterprise Development LP[13][10][13][10] RESTRICTED RIGHTS LEGEND[13][10] Confidential computer software. Valid license from Hewlett Packard Enterprise[13][10] Development LP required for possession, use or copying. Consistent with FAR[13][10] 12.211 and 12.212, Commercial Computer Software, Computer Software[13][10] Documentation, and Technical Data for Commercial Items are licensed to the[13][10] U.S. Government under vendor's standard commercial license.[13][10][13][10]We'd like to keep you up to date about:[13][10] * Software feature updates[13][10] * New product announcements[13][10] * Special events[13][10]Please register your products now at: www.hpe.com/networking/register[13][10][13][10]Press any key to continue
<W-3:09:59 PM>[13]
<R-3:09:59 PM>[27][?6l[27][1;24r[27][?7h[27][2J[27][1;1H[27][1920;1920H[27][6n[27][1;1HYour previous successful login (as manager) was on 2018-06-07 18:50:46 [13][10] from 192.168.20.114[13][10][27][1;24r[27][24;1H[27][24;1H[27][2K[27][24;1H[27][?25h[27][24;1H[27][24;1HHP POE M Building Switch# [27][24;1H[27][24;27H[27][24;1H[27][?25h[27][24;27H
<W-3:10:00 PM>[13]
<R-3:10:00 PM>[27][1;0H[27][1M[27][24;1H[27][1L[27][24;27H[27][24;1H[27][2K[27][24;1H[27][?25h[27][24;1H[27][1;24r[27][24;1H[27][1;24r[27][24;1H[27][24;1H[27][2K[27][24;1H[27][?25h[27][24;1H[27][24;1HHP POE M Building Switch# [27][24;1H[27][24;27H[27][24;1H[27][?25h[27][24;27H
<W-3:10:00 PM>enable
<R-3:10:00 PM>enable
<W-3:10:00 PM>[13]
<R-3:10:00 PM>Invalid input: enable[13][10]HP POE M Building Switch#
<W-3:10:01 PM>no page
<R-3:10:01 PM>no page
<W-3:10:01 PM>[13]
<R-3:10:01 PM>HP POE M Building Switch#
<W-3:10:01 PM>yes
<R-3:10:01 PM>yes
<W-3:10:01 PM>[13]
<R-3:10:01 PM>Invalid input: yes[13][10]HP POE M Building Switch#
================================================================================
WFMDRetVal=1 Waiting for: "Running configuration"
WFMDRetVal=2 Waiting for: "Building configuration..."
WFMDBuffer="yesinvalid input: yes[13][10]hp poe m building switch# "
================================================================================
<W-3:10:31 PM>page[13][10]
<R-3:10:31 PM>pageHP POE M Building Switch#
<W-3:10:35 PM>exit
<R-3:10:35 PM>exit
<W-3:10:35 PM>[13][10]
<R-3:10:35 PM>HP POE M Building Switch>
<W-3:10:36 PM>exit
<R-3:10:36 PM>exit
<W-3:10:37 PM>[13][10]
<R-3:10:37 PM>Do you want to log out (y/n)?
================================================================================
WFMDRetVal=1 Waiting for: "Invalid input:"
WFMDRetVal=2 Waiting for: "[confirm]"
WFMDRetVal=3 Waiting for: "[y/n]?"
WFMDRetVal=4 Waiting for: "Delete filename ["
WFMDRetVal=5 Waiting for: "Writing System Software to FLASH..."
WFMDRetVal=6 Waiting for: "New password"
WFMDRetVal=7 Waiting for: "Destination filename?"
WFMDRetVal=8 Waiting for: "Address of remote host?"
WFMDRetVal=9 Waiting for: "TFTP Server IP:"
WFMDRetVal=10 Waiting for: "TFTP Destnation file name:"
WFMDRetVal=11 Waiting for: "Rebooting switch"
WFMDRetVal=12 Waiting for: "HP POE M Building Switch>"
WFMDRetVal=13 Waiting for: "HP POE M Building Switch#"
WFMDBuffer="exitdo you want to log out (y/n)? "
================================================================================
<D 3:10:47 PM>
<SCRIPT VALUES>
<HOSTNAME="HP POE M Building Switch">
<PROMPT VTY="HP POE M Building Switch>">
<PROMPT ENABLE="HP POE M Building Switch#">
<PROMPT CONFIG="HP POE M Building Switch(config)#">