Hi!
The Activity Report.Version table fails with the new APC UPS Network Management Card 2 model AP9630 (AOS 5.x). The error is Failed to determine device prompt anchor point - Most likely reason is timeout. The reason is clear: APC has changed the telnet interface of the management card COMPLETELY. It's not a 1 2 3 4 menu, but now it uses commands. For example:
User Name : admin
Password : *****
American Power Conversion Network Management Card AOS v5.0.3
(c) Copyright 2009 All Rights Reserved Smart-UPS & Matrix-UPS APP v5.0.3
-------------------------------------------------------------------------------
Name : UPS01 Date : 02.03.2010
Contact : - Time : 11:53:39
Location : SOMEWHERE User : Administrator
Up Time : 11 Days 2 Hours 39 Minutes Stat : P+ N+ A+
apc>system
E000: Success
Name: UPS01
Contact: -
Location: SOMEWHERE
DateTime: 02.03.2010:11:53:43
User: Administrator
Up Time: 11 Days 2 Hours 39 Minutes
Stat: P+ N+ A+
Bootmon: bootmon:v1.0.0
AOS: aos:v5.0.3
App: sumx:v5.0.3
apc>help
Network Management Card Commands:
---------------------------------------------------------------------------
? about alarmcount boot cd date
delete dir eventlog exit format ftp
help ping portspeed prompt quit radius
reboot resetToDef system tcpip user web
xferINI xferStatus
Device Commands:
---------------------------------------------------------------------------
ups