Why does my activity timer stop each time I close the application?   I ensure the timer is started just before I exit, but when I run the application again, it is always turned off.

HI,

I am new to Cattools, and would like to know how to create a device group and also a nested device group

EG:-

Country   

     Security

          Firewall

          Proxy

     Network

          Switches

          Routers

I have a Palo Alto 3050 running 8.0.6.  I created a job to send some commands to the firewall and write the output to a file.

The test commands I'm sending are:

set cli pager off

set cli scripting-mode on

show system info

It really doesn't matter what command I send I never receive any output.   Here is what is written to the file/the output:

set

fw(active)> set cli [Kjodonnel-adm@NBDCRPIFW1(active)> set cli pager fw(active)> set cli pager off

fw(active)> set

fw(active)> set cli

fw(active)> set cli scripting-mode fw(active)> set cli scripting-mode on

fw(active)> show system info

I can't tell if the firewall isn't interpreting the carriage return of is experiencing an issue with the interactive session.

Wondering if anyone else experienced this issue.  I opened an case with support almost 3 weeks ago.  Uploaded a bunch of debugs and screen shots, but not response from tech support since......

Thanks!

Running daily backups with Kiwi Cattools and I have found that the program and timer do not automatically restart after a reboot having received windows updates.  Is there any way to ensure that the tool starts and starts the timer after a reboot?

I am new to CatTools and recently moved a customer's CatTools program from one server to another.  The new server OS is Windows Server 2008 R2, and version of CatTools is 3.3.11.

The issue I am experiencing after importing their previously-set jobs, email notifications and reports is that the jobs just randomly won't run.  If I am logged into the server and have CatTools running, everything works fine.  When I have the program closed and in Timer Mode, but still logged on to the server, it seems to still run the jobs ok *most* of the time.   However, it is hit or miss when I log off the server--sometimes the jobs run and other times they do nothing.

I have CatTools installed as a service, with a local admin account running the Kiwi CatTools service.  The service seems to run without issue.  The two clues I'm seeing that I don't know what to do about are that the mail queue seems to be getting set to "off" randomly, when I check the SendMailLog.  Sometimes it gets set to On when I close the program, and sometimes it gets set to Off.  Does the mail queue just turn on after a scheduled job runs that has the email notification configured?  The other clue is that in the InfoLog, sometimes I see "Unable to start timer, database is not connected" messages.  Again, no rhyme or reason as to why this happens, but nothing runs after I see those messages.

Can anyone assist with this?  Is there a compatibility issue with Server 2008?  I have put a ton of time into this and every time I think it is fixed, the customer comes back and says that they're not getting their email notifications again.  TIA.

Hello everybody,

I would like to save the config of our Checkpoint Fw, so i start by adding the device then i create an a backup running config activity, the activity use export command to save the configuration. i want to use the show configuration command i used the alternate command option and i used the show configuration. the execution of the activity take too match time when i stoped the activity i get the error below :

Did not receive expected response to command: show configuration.

Did someone have the same problem ? how to solve it ? how to save yhe checkpoint configuration?

Many thanks in advance

First prompt is the following:

login as: admin

Then the next prompt is the following:

User:admin
Password:

(Cisco Controller) >

Normally there is no "Login as:" prompt
They drop you straight to a User: prompt.

Also uses SSH2 for the connection.

I have handful of SonicWALLs in field I need to do scheduled backup. However from what I can tell, the Cattools 3.11 still can not backup SonicWALL properly. Versions of the running SonicOS are 5.9 and newer.

Maybe it was my configuration issue...Here below are some screenshots.

Other tabs are defaults and I did not use Variants if that matters.

Thanks,

/S

Hello,

I am pretty new in Kiwi CatTools so don't expect much.

The switch i wanted to back-up is the Cisco.SmallBusiness SF-300-24PP.

I keep getting this error;

'' Did not receive command prompt after connecting via SSH ''

I am using the evaluation version but cannot get log messages from our routers to write to the specified log file or the display.  I can write to the display and log when using the test option.  In the error log i see "Service running, but Service/Manager comm link is not connecting" and "Unable to connect to Service socket on TCP port 3300"

IP connectivity is good, also I have tried restarting the service and rebooting my machine without any success. 

Graeme

OK, what am I missing?

I installed CAT as a service, setup my backup schedule, start the timer. But when I close the manager, the timer stops.  How do I make that persistent? Or do I have to leave the manager open when I log out of the server?  I thought that was the point of the option of installing CAT as a service?

When I got to services, I see that its an installed service and its running and set to automatically start.

Hi,

I am having trouble get the activity scheduling time to start on machine boot.

I have Cattools running as a service and that starts fine if the machine is rebooted.

However the scheduling timer doesn't start even though I have checked the appropriate box on the "misc" tab ( "Option" and "setup") so I am having to start it manually everytime.

Anybody got any thoughts on the matter?

Thanks

Nigel

I am new to CatTools and recently moved a customer's CatTools program from one server to another.  The new server OS is Windows Server 2008 R2, and version of CatTools is 3.3.11.

The issue I am experiencing after importing their previously-set jobs, email notifications and reports is that the jobs just randomly won't run.  If I am logged into the server and have CatTools running, everything works fine.  When I have the program closed and in Timer Mode, but still logged on to the server, it seems to still run the jobs ok *most* of the time.   However, it is hit or miss when I log off the server--sometimes the jobs run and other times they do nothing.

I have CatTools installed as a service, with a local admin account running the Kiwi CatTools service.  The service seems to run without issue.  The two clues I'm seeing that I don't know what to do about are that the mail queue seems to be getting set to "off" randomly, when I check the SendMailLog.  Sometimes it gets set to On when I close the program, and sometimes it gets set to Off.  Does the mail queue just turn on after a scheduled job runs that has the email notification configured?  The other clue is that in the InfoLog, sometimes I see "Unable to start timer, database is not connected" messages.  Again, no rhyme or reason as to why this happens, but nothing runs after I see those messages.

Can anyone assist with this?  Is there a compatibility issue with Server 2008?  I have put a ton of time into this and every time I think it is fixed, the customer comes back and says that they're not getting their email notifications again.  TIA.

Dear Sir 

I am new to KIWIcat tool, first time I have installed this tool to integarate with cisco asa for backup purpose. We manage around 100 cisco asa firewall and used to take manual backup. So we want to convert this process automatically with the help of kiwicat tool. However I am getting error message while take backup through tool which is listed below.

Reason (30012) Protocol version mismatch error.. Giving up after 3 connection attempts"

Could you please let me know if I have wrongly configured this or having this error due to any other reason.

Version of tool is 3.6.0 which I believe is latest one.

Please let me know if you require any other information to dig out the problem.

Thanks in advance

I have a question, I have 2 Cisco WiSM  (Cisco 6500 blade) that I am trying to use Cat tools to backup the config files on a regular schedule. I have run into the following error when trying to run the activity:  "Did not receive expected response to command: configshow" and then Cat tools disconnects from the switch. I used telnet to issue the show running-config command and what I noticed is right after the show running-config command is issued the switch prompts with: "Press Enter to continue or <CTRL-Z> to abort"  or "--More-- or (q)uit " and sits there until there is user intervension. How can I automate the CR to continue command so I can use Cattools to pull the configuration of these switches? Any help would be greatly appreciated.

Thanks

Hi, I want to backup an Aruba switchstack and received this error message.

I created the device as Generic.Device and tried a lot of different combinations of Prompts and variations but I always get "Did not receive command prompt after connecting via SSH".

What are the correct settings to backup an Aruba Switch?

Here the message I get, depending on the configuration it slightly changes:

<NEWSESSION CatTools 3.11.4 06.09.2018 15:27:10>

<PROTOCOL=SSH2>

<DEVICE TYPE=Generic.Device>

<ACTIVITY TYPE=Device.Backup.Running Config>

<ACTIVITY SCRIPT=D:\Kiwi\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>

<USERS NAME FOR DEVICE=myswitch>

<C OK 15:27:11>

<R-15:27:11>We'd like to keep you up to date about:[10]  * Software feature updates[10]  * New product announcements[10]  * Special events[10]Please register your products now at:  www.hpe.com/networking/register[10][10][10]

<R-15:27:11>Aruba JL075A 3810M-16SFP+-2-slot Switch[13][13][10]Software revision KB.16.06.0006[13][13][10][13][13][10] (C) Copyright 2018 Hewlett Packard Enterprise Development LP[13][10][13][10]                      RESTRICTED RIGHTS LEGEND[13][10] Confidential computer software. Valid license from Hewlett Packard Enterprise[13][10] Development LP required for possession, use or copying. Consistent with FAR[13][10] 12.211 and 12.212, Commercial Computer Software, Computer Software[13][10] Documentation, and Technical Data for Commercial Items are licensed to the[13][10] U.S. Government under vendor's standard commercial license.[13][10][13][10][27][1;13r[27][1;1H

<R-15:27:11>[27][24;1HPress any key to continue[27][13;1H[27][?25h[27][24;27H

================================================================================

WFMDRetVal=1 Waiting for: ">"

WFMDRetVal=2 Waiting for: "#"

WFMDRetVal=3 Waiting for: "Username:"

WFMDRetVal=4 Waiting for: "Password"

WFMDBuffer="we'd like to keep you up to date about:[10]  * software feature updates[10]  * new product announcements[10]  * special events[10]please register your products now at:  www.hpe.com/networking/register[10][10][10]aruba jl075a 3810m-16sfp+-2-slot switch[13][13][10]software revision kb.16.06.0006[13][13][10][13][13][10] (c) copyright 2018 hewlett packard enterprise development lp[13][10][13][10]                      restricted rights legend[13][10] confidential computer software. valid license from hewlett packard enterprise[13][10] development lp required for possession, use or copying. consistent with far[13][10] 12.211 and 12.212, commercial computer software, computer software[13][10] documentation, and technical data for commercial items are licensed to the[13][10] u.s. government under vendor's standard commercial license.[13][10][13][10][27][1;13r[27][1;1h[27][24;1hpress any key to continue[27][13;1h[27][?25h[27][24;27h"

================================================================================

Best regards

Patrick

We are running CaTTools 3.11 for backing up several of our Cisco switches and it is working great.  However, we also have a bunch of HP switches that we are also trying to use CaTTools with but I'm having trouble getting it working...

Started trying on a HP J9827a switch with 4 cards in it.

I've messed around with the different HP switch options including "other" and the variations...

From the debug log it looks to me like its dumping all the commands early not waiting for the prompts.  How do I make it wait for the appropriate parts? 

we dont have logins setup and that is all unchecked in the setup...

What am I missing? (debug below)

<NEWSESSION CatTools 3.11.2 6/7/2018 3:09:58 PM>

<PROTOCOL=Telnet>

<DEVICE TYPE=HP.Switch.2500>

<ACTIVITY TYPE=Device.Backup.Running Config>

<ACTIVITY SCRIPT=C:\Program Files (x86)\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>

<USERS NAME FOR DEVICE=Building M Old Computer Room HP 48 port>

<C OK 3:09:58 PM>

<R-3:09:59 PM>HP J9850A Switch 5406Rzl2[13][13][10]Software revision KB.16.05.0004[13][13][10][13][13][10] (C) Copyright 2017 Hewlett Packard Enterprise Development LP[13][10][13][10]                      RESTRICTED RIGHTS LEGEND[13][10] Confidential computer software. Valid license from Hewlett Packard Enterprise[13][10] Development LP required for possession, use or copying. Consistent with FAR[13][10] 12.211 and 12.212, Commercial Computer Software, Computer Software[13][10] Documentation, and Technical Data for Commercial Items are licensed to the[13][10] U.S. Government under vendor's standard commercial license.[13][10][13][10]We'd like to keep you up to date about:[13][10]  * Software feature updates[13][10]  * New product announcements[13][10]  * Special events[13][10]Please register your products now at:  www.hpe.com/networking/register[13][10][13][10]Press any key to continue

<W-3:09:59 PM>[13]

<R-3:09:59 PM>[27][?6l[27][1;24r[27][?7h[27][2J[27][1;1H[27][1920;1920H[27][6n[27][1;1HYour previous successful login (as manager) was on 2018-06-07 18:50:46     [13][10] from 192.168.20.114[13][10][27][1;24r[27][24;1H[27][24;1H[27][2K[27][24;1H[27][?25h[27][24;1H[27][24;1HHP POE M Building Switch# [27][24;1H[27][24;27H[27][24;1H[27][?25h[27][24;27H

<W-3:10:00 PM>[13]

<R-3:10:00 PM>[27][1;0H[27][1M[27][24;1H[27][1L[27][24;27H[27][24;1H[27][2K[27][24;1H[27][?25h[27][24;1H[27][1;24r[27][24;1H[27][1;24r[27][24;1H[27][24;1H[27][2K[27][24;1H[27][?25h[27][24;1H[27][24;1HHP POE M Building Switch# [27][24;1H[27][24;27H[27][24;1H[27][?25h[27][24;27H

<W-3:10:00 PM>enable

<R-3:10:00 PM>enable

<W-3:10:00 PM>[13]

<R-3:10:00 PM>Invalid input: enable[13][10]HP POE M Building Switch#

<W-3:10:01 PM>no page

<R-3:10:01 PM>no page

<W-3:10:01 PM>[13]

<R-3:10:01 PM>HP POE M Building Switch#

<W-3:10:01 PM>yes

<R-3:10:01 PM>yes

<W-3:10:01 PM>[13]

<R-3:10:01 PM>Invalid input: yes[13][10]HP POE M Building Switch#

================================================================================

WFMDRetVal=1 Waiting for: "Running configuration"

WFMDRetVal=2 Waiting for: "Building configuration..."

WFMDBuffer="yesinvalid input: yes[13][10]hp poe m building switch# "

================================================================================

<W-3:10:31 PM>page[13][10]

<R-3:10:31 PM>pageHP POE M Building Switch#

<W-3:10:35 PM>exit

<R-3:10:35 PM>exit

<W-3:10:35 PM>[13][10]

<R-3:10:35 PM>HP POE M Building Switch>

<W-3:10:36 PM>exit

<R-3:10:36 PM>exit

<W-3:10:37 PM>[13][10]

<R-3:10:37 PM>Do you want to log out (y/n)?

================================================================================

WFMDRetVal=1 Waiting for: "Invalid input:"

WFMDRetVal=2 Waiting for: "[confirm]"

WFMDRetVal=3 Waiting for: "[y/n]?"

WFMDRetVal=4 Waiting for: "Delete filename ["

WFMDRetVal=5 Waiting for: "Writing System Software to FLASH..."

WFMDRetVal=6 Waiting for: "New password"

WFMDRetVal=7 Waiting for: "Destination filename?"

WFMDRetVal=8 Waiting for: "Address of remote host?"

WFMDRetVal=9 Waiting for: "TFTP Server IP:"

WFMDRetVal=10 Waiting for: "TFTP Destnation file name:"

WFMDRetVal=11 Waiting for: "Rebooting switch"

WFMDRetVal=12 Waiting for: "HP POE M Building Switch>"

WFMDRetVal=13 Waiting for: "HP POE M Building Switch#"

WFMDBuffer="exitdo you want to log out (y/n)? "

================================================================================

<D 3:10:47 PM>

<SCRIPT VALUES>

<HOSTNAME="HP POE M Building Switch">

<PROMPT VTY="HP POE M Building Switch>">

<PROMPT ENABLE="HP POE M Building Switch#">

<PROMPT CONFIG="HP POE M Building Switch(config)#">

Hi  there,

I am running Cat Tools 3.3.17 and trying to backup all my device configs to one server.

I am having an issue with 2 HP switches - I receive a

I am not too familiar with setting the device information - password, manager password etc. I have it for Direct connect via SSH2

Any help would be grateful!

G

Hello,

Does anyone know how to fix the below error:

(30016) Invalid username or password reported by server, or bad private key

Much appreciated!!!

Hey there,

since the last update im having several problems, one particular with command issuing and echo timeout i guess.

While issuing the following commands in a job

sh version

failover exec mate sh vers

show inventory

failover exec mate sh inventory

show int | grep error

sh access-list outside-access-out | i line 1 extended

sh access-list outside_access_out | i line 1 extended

sh failover

2 of about 150 devices are aborting due to command error and just showing a single line of the first command in the file:

asa-emft-oph# sh version

the same when issuing just "sh run"

Here the debug output for those 2 devices:

Device1:

<W-10:37:50>ssh -2 -l nocadmin XXXXXXXXX

<R-10:37:50>ssh -2 -l nocadmin XXXXXXXXXXX

<W-10:37:50>[13]

<R-10:37:50>[13][10]

<R-10:37:50>nocadmin@XXXXXXX's password:

<W-10:37:50>XXXXXXXXXXXXXXXXX[13]

<R-10:37:50>[13][10]

<R-10:37:51>Type help or '?' for a list of available commands.[13][10][13]asa-emft-oph#

<W-10:37:51>[13]

<W-10:37:51>[13]

<R-10:37:51>[13][10][13]asa-emft-oph#

<W-10:37:51>[13]

<R-10:37:51>[13][10][13]asa-emft-oph#

<W-10:37:51>sh version

<R-10:37:51>[13][10][13]asa-emft-oph#

<R-10:37:51>sh version

<W-10:37:51>[13]

<W-10:37:52>failover exec mate sh vers

<R-10:37:52>[13][10][13][10]Cisco Adaptive Security Appliance Software Version 9.1(7)23 [13][10]Device Manager Version 7.8(1)[13][10][13][10]Compiled on Thu 01-Feb-18 23:08 by builders[13][10]System image file is "disk0:/asa917-23-k8.bin"[13][10]Config file at boot was "disk0:/asa-emft-oph.cfg"[13][10][13][10]asa-emft-oph up 125 days 4 hours[13][10][13][10]Hardware:   ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz,[13][10]Internal ATA Compact Flash, 256MB[13][10]Slot 1: ATA Compact Flash, 512MB[13][10]BIOS Flash M50FW016 @ 0xfff00000, 2048KB[13][10][13][10]Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x0)[13][10]                             Boot microcode        : CN1000-MC-BOOT-2.00 [13][10]                             SSL/IKE microcode     : CNlite-MC-SSLm-PLUS-2.08[13][10]                             IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.09[13][10]                             Number of accelerators: 1[13][10][13][10] 0: Ext: GigabitEthernet0/0  : address is f866.f2c4.a4cc, irq 9[13][10] 1: Ext: GigabitEthernet0/1  : address is f866.f2c4.a4cd, irq 9[13][10] 2: Ext: GigabitEthernet0/2  : address is f866.f2c4.a4ce, irq 9[13][10] 3: Ext: GigabitEthernet0/3  : address is f866.f2c4.a4cf, irq 9[13][10]<--- More --->

<R-10:37:52>[13]              [13] 4: Ext: Management0/0       : address is f866.f2c4.a4cb, irq 11[13][10] 5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11[13][10] 6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5[13][10][13][10]Licensed features for this platform:[13][10]Maximum Physical Interfaces       : Unlimited      perpetual[13][10]Maximum VLANs                     : 150            perpetual[13][10]Inside Hosts                      : Unlimited      perpetual[13][10]Failover                          : Active/Active  perpetual[13][10]Encryption-DES                    : Enabled        perpetual[13][10]Encryption-3DES-AES               : Enabled        perpetual[13][10]Security Contexts                 : 2              perpetual[13][10]GTP/GPRS                          : Disabled       perpetual[13][10]AnyConnect Premium Peers          : 2              perpetual[13][10]AnyConnect Essentials             : Disabled       perpetual[13][10]Other VPN Peers                   : 750            perpetual[13][10]Total VPN Peers                   : 750            perpetual[13][10]Shared License                    : Disabled       perpetual[13][10]AnyConnect for Mobile             : Disabled       perpetual[13][10]AnyConnect for Cisco VPN Phone    : Disabled       perpetual[13][10]Advanced Endpoint Assessment      : Disabled       perpetual[13][10]UC Phone Proxy Sessions           : 2              perpetual[13][10]Total UC Proxy Sessions           : 2              perpetual[13][10]Botnet Traffic Filter             : Disabled       perpetual[13][10]<--- More --->[13]              [13]Intercompany Media Engine         : Disabled       perpetual[13][10]Cluster                           : Disabled       perpetual[13][10][13][10]This platform has an ASA 5520 VPN Plus license.[13][10][13][10]Serial Number: JMX1447L037[13][10]Running Permanent Activation Key: 0xd827ec71 0x88d7e59b 0x9c212148 0x9d108494 0x8f201181 [13][10]

<R-10:37:53>Configuration register is 0x1[13][10]Configuration last modified by admin at 13:33:40.297 CEDT Wed Jun 13 2018[13][10][13]asa-emft-oph# mate sh vers

================================================================================

WFDRetVal=0. Waiting for: "failoverexecmateshvers"

WFDBuffer="ciscoadaptivesecurityappliancesoftwareversion9.1(7)23devicemanagerversion7.8(1)compiledonthu01-feb-1823:08bybuilderssystemimagefileis"disk0:/asa917-23-k8.bin"configfileatbootwas"disk0:/asa-emft-oph.cfg"asa-emft-ophup125days4hourshardware:asa5520,2048mbram,cpupentium4celeron2000mhz,internalatacompactflash,256mbslot1:atacompactflash,512mbbiosflashm50fw016@0xfff00000,2048kbencryptionhardwaredevice:ciscoasa-55xxon-boardaccelerator(revision0x0)bootmicrocode:cn1000-mc-boot-2.00ssl/ikemicrocode:cnlite-mc-sslm-plus-2.08ipsecmicrocode:cnlite-mc-ipsecm-main-2.09numberofaccelerators:10:ext:gigabitethernet0/0:addressisf866.f2c4.a4cc,irq91:ext:gigabitethernet0/1:addressisf866.f2c4.a4cd,irq92:ext:gigabitethernet0/2:addressisf866.f2c4.a4ce,irq93:ext:gigabitethernet0/3:addressisf866.f2c4.a4cf,irq9<---more--->4:ext:management0/0:addressisf866.f2c4.a4cb,irq115:int:internal-data0/0:addressis0000.0001.0002,irq116:int:internal-control0/0:addressis0000.0001.0001,irq5licensedfeaturesforthisplatform:maximumphysicalinterfaces:unlimitedperpetualmaximumvlans:150perpetualinsidehosts:unlimitedperpetualfailover:active/activeperpetualencryption-des:enabledperpetualencryption-3des-aes:enabledperpetualsecuritycontexts:2perpetualgtp/gprs:disabledperpetualanyconnectpremiumpeers:2perpetualanyconnectessentials:disabledperpetualothervpnpeers:750perpetualtotalvpnpeers:750perpetualsharedlicense:disabledperpetualanyconnectformobile:disabledperpetualanyconnectforciscovpnphone:disabledperpetualadvancedendpointassessment:disabledperpetualucphoneproxysessions:2perpetualtotalucproxysessions:2perpetualbotnettrafficfilter:disabledperpetual<---more--->intercompanymediaengine:disabledperpetualcluster:disabledperpetualthisplatformhasanasa5520vpnpluslicense.serialnumber:jmx1447l037runningpermanentactivationkey:0xd827ec710x88d7e59b0x9c2121480x9d1084940x8f201181configurationregisteris0x1configurationlastmodifiedbyadminat13:33:40.297cedtwedjun132018asa-emft-oph#mateshvers"

================================================================================

<W-10:38:23>[13]

<R-10:38:23>[13][10]               ^[13][10]ERROR: % Invalid input detected at '^' marker.[13][10][13]asa-emft-oph#

<W-10:38:23>[13]

<R-10:38:23>[13][10][13]asa-emft-oph#

<W-10:38:23>disable

<R-10:38:24>disable

<W-10:38:24>[13]

<R-10:38:24>[13][10][13]asa-emft-oph>

<W-10:38:24>[13]

<R-10:38:24>[13][10][13]asa-emft-oph>

<W-10:38:24>exit[13]

<D 10:38:24>

<SCRIPT VALUES>

<HOSTNAME="asa-emft-oph">

<PROMPT VTY="asa-emft-oph>">

<PROMPT ENABLE="asa-emft-oph#">

<PROMPT CONFIG="asa-emft-oph(">

Device2:

<W-10:37:50>ssh -2 -l nocadmin XXXXXXXX

<R-10:37:50>ssh -2 -l nocadmin XXXXXXXXXX

<W-10:37:50>[13]

<R-10:37:50>[13][10]

<R-10:37:50>Unauthorized access prohibited[13][10]nocadmin@192.44.23.130's password:

<W-10:37:50>XXXXXXXXXXXXXX[13]

<R-10:37:50>[13][10]

<R-10:37:51>User nocadmin logged in to asa-iml[13][10]Logins over the last 127 days: 521.  Last login: 10:13:13 CEDT Jun 14 2018 from 153.96.2.16[13][10]Failed logins since the last login: 0.  [13][10]Type help or '?' for a list of available commands.[13][10][13]asa-iml#

<W-10:37:51>[13]

<W-10:37:51>[13]

<R-10:37:51>[13][10][13]asa-iml#

<W-10:37:51>[13]

<R-10:37:51>[13][10][13]asa-iml#

<W-10:37:51>sh version

<R-10:37:51>[13][10][13]asa-iml#

<R-10:37:51>sh version

<W-10:37:51>[13]

<W-10:37:51>failover exec mate sh vers

<R-10:37:51>[13][10][13][10]Cisco Adaptive Security Appliance Software Version 9.8(2)20 [13][10]Firepower Extensible Operating System Version 2.2(2.63)[13][10]Device Manager Version 7.8(1)[13][10][13][10]Compiled on Fri 02-Feb-18 06:18 PST by builders[13][10]System image file is "disk0:/asa982-20-smp-k8.bin"[13][10]Config file at boot was "disk0:/asa-iml.cfg"[13][10][13][10]asa-iml up 126 days 19 hours[13][10]failover cluster up 302 days 16 hours[13][10][13][10]Hardware:   ASA5545, 12288 MB RAM, CPU Lynnfield 2660 MHz, 1 CPU (8 cores)[13][10]            ASA: 6466 MB RAM, 1 CPU (1 core)[13][10]Internal ATA Compact Flash, 8192MB[13][10]BIOS Flash MX25L6445E @ 0xffbb0000, 8192KB[13][10][13][10]Encryption hardware device : Cisco ASA Crypto on-board accelerator (revision 0x1)[13][10]                             Boot microcode        : CNPx-MC-BOOT-2.00[13][10]                             SSL/IKE microcode     : CNPx-MC-SSL-SB-PLUS-0005[13][10]                             IPSec microcode       : CNPx-MC-IPSEC-MAIN-0026[13][10]                             Number of accelerators: 1[13][10]Baseboard Management Controller (revision 0x1) Firmware Version: 2.4[13][10][13][10][13][10]<--- More --->

<R-10:37:51>[13]              [13] 0: Int: Internal-Data0/0    : address is 0027.e3e4.0220, irq 11[13][10] 1: Ext: GigabitEthernet0/0  : address is 0027.e3e4.0225, irq 5[13][10] 2: Ext: GigabitEthernet0/1  : address is 0027.e3e4.0221, irq 5[13][10] 3: Ext: GigabitEthernet0/2  : address is 0027.e3e4.0226, irq 10[13][10] 4: Ext: GigabitEthernet0/3  : address is 0027.e3e4.0222, irq 10[13][10] 5: Ext: GigabitEthernet0/4  : address is 0027.e3e4.0227, irq 5[13][10] 6: Ext: GigabitEthernet0/5  : address is 0027.e3e4.0223, irq 5[13][10] 7: Ext: GigabitEthernet0/6  : address is 0027.e3e4.0228, irq 10[13][10] 8: Ext: GigabitEthernet0/7  : address is 0027.e3e4.0224, irq 10[13][10] 9: Int: Internal-Data0/1    : address is 0000.0001.0002, irq 0[13][10]10: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 0[13][10]11: Int: Internal-Data0/2    : address is 0000.0001.0003, irq 0[13][10]12: Ext: Management0/0       : address is 0027.e3e4.0220, irq 0[13][10]13: Int: Internal-Data0/3    : address is 0000.0100.0001, irq 0[13][10][13][10]Licensed features for this platform:[13][10]Maximum Physical Interfaces       : Unlimited      perpetual[13][10]Maximum VLANs                     : 300            perpetual[13][10]Inside Hosts                      : Unlimited      perpetual[13][10]Failover                          : Active/Active  perpetual[13][10]Encryption-DES                    : Enabled        perpetual[13][10]Encryption-3DES-AES               : Enabled        perpetual[13][10]Security Contexts                 : 2              perpetual[13][10]Carrier                           : Disabled       perpetual[13][10]<--- More --->[13]              [13]AnyConnect Premium Peers          : 2500           perpetual[13][10]AnyConnect Essentials             : Disabled       perpetual[13][10]Other VPN Peers                   : 2500           perpetual[13][10]Total VPN Peers                   : 2500           perpetual[13][10]AnyConnect for Mobile             : Enabled        perpetual[13][10]AnyConnect for Cisco VPN Phone    : Enabled        perpetual[13][10]Advanced Endpoint Assessment      : Enabled        perpetual[13][10]Shared License                    : Disabled       perpetual[13][10]Total TLS Proxy Sessions          : 2              perpetual[13][10]Botnet Traffic Filter             : Disabled       perpetual[13][10]IPS Module                        : Disabled       perpetual[13][10]Cluster                           : Enabled        perpetual[13][10]Cluster Members                   : 2              perpetual[13][10][13][10]This platform has an ASA5545 VPN Premium license.[13][10][13][10][13][10]Failover cluster licensed features for this platform:[13][10]Maximum Physical Interfaces       : Unlimited      perpetual[13][10]Maximum VLANs                     : 300            perpetual[13][10]Inside Hosts                      : Unlimited      perpetual[13][10]Failover                          : Active/Active  perpetual[13][10]Encryption-DES                    : Enabled        perpetual[13][10]Encryption-3DES-AES               : Enabled        perpetual[13][10]<--- More --->

<R-10:37:51>[13]              [13]Security Contexts                 : 4              perpetual[13][10]Carrier                           : Disabled       perpetual[13][10]AnyConnect Premium Peers          : 2500           perpetual[13][10]AnyConnect Essentials             : Disabled       perpetual[13][10]Other VPN Peers                   : 2500           perpetual[13][10]Total VPN Peers                   : 2500           perpetual[13][10]AnyConnect for Mobile             : Enabled        perpetual[13][10]AnyConnect for Cisco VPN Phone    : Enabled        perpetual[13][10]Advanced Endpoint Assessment      : Enabled        perpetual[13][10]Shared License                    : Disabled       perpetual[13][10]Total TLS Proxy Sessions          : 4              perpetual[13][10]Botnet Traffic Filter             : Disabled       perpetual[13][10]IPS Module                        : Disabled       perpetual[13][10]Cluster                           : Enabled        perpetual[13][10][13][10]This platform has an ASA5545 VPN Premium license.[13][10][13][10]Serial Number: FCH21147VP5[13][10]Running Permanent Activation Key: 0x752ec867 0x24c86c51 0x11727950 0xda9cf0d8 0xc01cf2bc [13][10]

<R-10:37:52>Configuration register is 0x1[13][10][13][10]Image type          : Release[13][10]Key version         : A[13][10][13][10]<--- More --->[13]              [13]Configuration last modified by root at 09:56:02.322 CEDT Wed Jun 13 2018[13][10][13]asa-iml# vers

================================================================================

WFDRetVal=0. Waiting for: "failoverexecmateshvers"

WFDBuffer="ciscoadaptivesecurityappliancesoftwareversion9.8(2)20firepowerextensibleoperatingsystemversion2.2(2.63)devicemanagerversion7.8(1)compiledonfri02-feb-1806:18pstbybuilderssystemimagefileis"disk0:/asa982-20-smp-k8.bin"configfileatbootwas"disk0:/asa-iml.cfg"asa-imlup126days19hoursfailoverclusterup302days16hourshardware:asa5545,12288mbram,cpulynnfield2660mhz,1cpu(8cores)asa:6466mbram,1cpu(1core)internalatacompactflash,8192mbbiosflashmx25l6445e@0xffbb0000,8192kbencryptionhardwaredevice:ciscoasacryptoon-boardaccelerator(revision0x1)bootmicrocode:cnpx-mc-boot-2.00ssl/ikemicrocode:cnpx-mc-ssl-sb-plus-0005ipsecmicrocode:cnpx-mc-ipsec-main-0026numberofaccelerators:1baseboardmanagementcontroller(revision0x1)firmwareversion:2.4<---more--->0:int:internal-data0/0:addressis0027.e3e4.0220,irq111:ext:gigabitethernet0/0:addressis0027.e3e4.0225,irq52:ext:gigabitethernet0/1:addressis0027.e3e4.0221,irq53:ext:gigabitethernet0/2:addressis0027.e3e4.0226,irq104:ext:gigabitethernet0/3:addressis0027.e3e4.0222,irq105:ext:gigabitethernet0/4:addressis0027.e3e4.0227,irq56:ext:gigabitethernet0/5:addressis0027.e3e4.0223,irq57:ext:gigabitethernet0/6:addressis0027.e3e4.0228,irq108:ext:gigabitethernet0/7:addressis0027.e3e4.0224,irq109:int:internal-data0/1:addressis0000.0001.0002,irq010:int:internal-control0/0:addressis0000.0001.0001,irq011:int:internal-data0/2:addressis0000.0001.0003,irq012:ext:management0/0:addressis0027.e3e4.0220,irq013:int:internal-data0/3:addressis0000.0100.0001,irq0licensedfeaturesforthisplatform:maximumphysicalinterfaces:unlimitedperpetualmaximumvlans:300perpetualinsidehosts:unlimitedperpetualfailover:active/activeperpetualencryption-des:enabledperpetualencryption-3des-aes:enabledperpetualsecuritycontexts:2perpetualcarrier:disabledperpetual<---more--->anyconnectpremiumpeers:2500perpetualanyconnectessentials:disabledperpetualothervpnpeers:2500perpetualtotalvpnpeers:2500perpetualanyconnectformobile:enabledperpetualanyconnectforciscovpnphone:enabledperpetualadvancedendpointassessment:enabledperpetualsharedlicense:disabledperpetualtotaltlsproxysessions:2perpetualbotnettrafficfilter:disabledperpetualipsmodule:disabledperpetualcluster:enabledperpetualclustermembers:2perpetualthisplatformhasanasa5545vpnpremiumlicense.failoverclusterlicensedfeaturesforthisplatform:maximumphysicalinterfaces:unlimitedperpetualmaximumvlans:300perpetualinsidehosts:unlimitedperpetualfailover:active/activeperpetualencryption-des:enabledperpetualencryption-3des-aes:enabledperpetual<---more--->securitycontexts:4perpetualcarrier:disabledperpetualanyconnectpremiumpeers:2500perpetualanyconnectessentials:disabledperpetualothervpnpeers:2500perpetualtotalvpnpeers:2500perpetualanyconnectformobile:enabledperpetualanyconnectforciscovpnphone:enabledperpetualadvancedendpointassessment:enabledperpetualsharedlicense:disabledperpetualtotaltlsproxysessions:4perpetualbotnettrafficfilter:disabledperpetualipsmodule:disabledperpetualcluster:enabledperpetualthisplatformhasanasa5545vpnpremiumlicense.serialnumber:fch21147vp5runningpermanentactivationkey:0x752ec8670x24c86c510x117279500xda9cf0d80xc01cf2bcconfigurationregisteris0x1imagetype:releasekeyversion:a<---more--->configurationlastmodifiedbyrootat09:56:02.322cedtwedjun132018asa-iml#vers"

================================================================================

<W-10:38:22>[13]

<R-10:38:22>[13][10]            ^[13][10]ERROR: % Invalid input detected at '^' marker.[13][10][13]asa-iml#

<W-10:38:22>[13]

<R-10:38:22>[13][10][13]asa-iml#

<W-10:38:22>disable

<R-10:38:22>disable

<W-10:38:22>[13]

<R-10:38:22>[13][10][13]asa-iml>

<W-10:38:22>[13]

<R-10:38:22>[13][10][13]asa-iml>

<W-10:38:23>exit[13]

<D 10:38:23>

<SCRIPT VALUES>

<HOSTNAME="asa-iml">

<PROMPT VTY="asa-iml>">

<PROMPT ENABLE="asa-iml#">

<PROMPT CONFIG="asa-iml(">

The Devices are accessed with a jumphost based on linux which never made any problems before, and does not interfere with alle the other ASAs where its working, so i guess this isnt the problem.

Any suggestions?