Quantcast
Channel: THWACK: Popular Discussions - Kiwi CatTools
Viewing all 21331 articles
Browse latest View live
↧

Backup Extreme Summit switches using TFTP commands

June 15, 2015, 3:10 am
$
0
0

Hi, We have just installed some extreme switches and currently
it is backing up using model X450-24X running the show configuration command.

We are wanting to run the following below command and wondered whether this
would be possible if we had a variations file and running a TFTP server on
server where cat tools is installed.

 

tftp put x.x.x.x vr "VR-Default"primary.cfg **Saved file name***.cfg

 

The above command makes it easier to restore configs if we were to have issues.

 

We tried running Device.Backup.TFTP activity but it currently only supports Cisco Devices.

 

 

Thanks

↧
Search

Cattols 3.10 to FortiOS 5.2.5 or 5.4 doesn´t work

January 14, 2016, 11:47 pm
$
0
0

Hi,

 

since we upgraded to FortiOS 5.2.5 or 5.4 Cattools gives us the error message "Failed to connect to XXX. Reason: No respone from remote host. Will try again."

If we connect to it with Putty we get a session.

 

Have debugged the SSH from FortiOS but no error messages is shown.

 

The debug in Cattools doesn´t give any errors either:

<NEWSESSION CatTools 3.10.0 2016-01-15 08:41:31>

<PROTOCOL=SSH2>

<DEVICE TYPE=Fortinet.FortiOS.General>

<ACTIVITY TYPE=Device.Backup.Running Config>

<ACTIVITY SCRIPT=D:\Program Files (x86)\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>

<USERS NAME FOR DEVICE=nbo-osd2fw01>

<D 13:48:31>

<SCRIPT VALUES>

<HOSTNAME="">

<PROMPT VTY="">

<PROMPT ENABLE="">

<PROMPT CONFIG="">

 

We have tried all different SSH ciphers but with the same result. When we save the ciphers we can see that it sends it to the FortiOS and that it accept it.

 

Any ideas?

 

Robin

↧
↧

Backup APC SmartUPS Network Management Card Config

November 2, 2010, 1:33 am
$
0
0

Hi!

Is there a chance that CatTools could retrieve the config.ini of a APC SmartUPS AP9617/AP9630 Network Management Card using FTP? It would be great if someone of the development team could have a look at it.

Here's a "capture" of a FTP session:

ftp> open 10.0.0.1
Connected to 10.0.0.1.
220 AP9617 Network Management Card AOS v3.7.3 FTP server ready.
User (10.0.0.1:(none)): admin
331 User name okay, need password.
Password:
230 User logged in, proceed.
ftp> bin
200 TYPE Command okay.
ftp> hash
Hash mark printing On  ftp: (2048 bytes/hash mark) .
ftp> get config.ini
200 PORT Command okay.
150 File status okay; about to open data connection.
#######################226 Closing data connection.
ftp: 47311 bytes received in 15,25Seconds 3,10Kbytes/sec.
ftp> close
221 Thank you for using APC products!
ftp> quit

Regards, Leonardo

↧

Script for HP/H3C Switches

September 26, 2012, 12:33 am
$
0
0

Hi!

 

I'm trying to backup the config of our new HP (H3C) Switches (5120, 5800, 10500). The script I created out of the Custom.Template is not working. The prompt of the switches is "<SWITCHNAME>", not "SWITCHNAME>" as in Ciscos IOS. So the script returns the error "Did not receive expected prompt when entering Enable mode".

Has anybody managed to create a script that works with the HP H3C switches?

 

Regards, lls71

↧

Did not receive VTY entry prompt from HP

November 10, 2010, 3:55 am
$
0
0

Hi

I am new to Cattools

I am trying to backup configuration on my HP ProCurve switchs (mainly 2510 and 2626)

I got "Did not receive VTY entry prompt from HP" when trying to do Device.Backup.Running.Config.

The switch is default configured with no password.

Debug log

--------------------


<NEWSESSION CatTools 3.5.0 10-11-2010 13:39:14>
<PROTOCOL=Telnet>
<DEVICE TYPE=HP.Switch.2500>
<ACTIVITY TYPE=Device.Backup.Running Config>
<ACTIVITY SCRIPT=C:\Program Files (x86)\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>
<USERS NAME FOR DEVICE=SW12>
<C OK 13:39:14><R-13:39:14>[27][2J[27][?7l[27][3;23r[27][?6l[27][1;1H[27][?25l[27][1;1HProCurve J9279A Switch 2510G-24[13][10][13]Software revision Y.11.16[13][10][13][13][10][13]Copyright (C) 1991-2009 Hewlett-Packard Co.  All Rights Reserved.[10][13][10][13]                           RESTRICTED RIGHTS LEGEND[10][13][10][13] Use, duplication, or disclosure by the Government is subject to restrictions[10][13] as set forth in subdivision (b) (3) (ii) of the Rights in Technical Data and[10][13] Computer Software clause at 52.227-7013.[10][13][10][13]         HEWLETT-PACKARD COMPANY, 3000 Hanover St., Palo Alto, CA 94303[10][13][10][13]We'd like to keep you up to date about:[10][13]  * Software feature updates[10][13]  * New product announcements[10][13]  * Special events[10][13][10][13]Please register your products now at:  www.ProCurve.com[10][13][10][13][10][13][27][1;24r[27][1;1H
================================================================================
WFMDRetVal=1 Waiting for: "ress any key to continue"
WFMDRetVal=2 Waiting for: "Password required, but none set"
WFMDRetVal=3 Waiting for: "Password:"
WFMDRetVal=4 Waiting for: "Username:"
WFMDBuffer="[27][2j[27][?7l[27][3;23r[27][?6l[27][1;1h[27][?25l[27][1;1hprocurve j9279a switch 2510g-24[13][10][13]software revision y.11.16[13][10][13][13][10][13]copyright (c) 1991-2009 hewlett-packard co.  all rights reserved.[10][13][10][13]                           restricted rights legend[10][13][10][13] use, duplication, or disclosure by the government is subject to restrictions[10][13] as set forth in subdivision (b) (3) (ii) of the rights in technical data and[10][13] computer software clause at 52.227-7013.[10][13][10][13]         hewlett-packard company, 3000 hanover st., palo alto, ca 94303[10][13][10][13]we'd like to keep you up to date about:[10][13]  * software feature updates[10][13]  * new product announcements[10][13]  * special events[10][13][10][13]please register your products now at:  www.procurve.com[10][13][10][13][10][13][27][1;24r[27][1;1h"
================================================================================

↧
↧

Fortinet backup to tftp: not able to overwrite existing file

March 20, 2012, 1:48 am
$
0
0

Hello everybody.

I've set up tftp backups of some of my Fortigate firewalls. The first backup runs OK, but the subsequent ones will fail because of "Error code 2: Access violation". I've played a bit with it and it seems that it cannot overwrite the already existing backup file in the TFTP folder.

Anybody knows how to solve this?

The Kiwi CatTools Service is run by "Local System account".

Any help will be appreciated.

Thanks and regards,

F.

↧

Did not receive expected response to command: show running-config

September 1, 2010, 3:31 am
$
0
0

I have a question, I have 2 Cisco WiSM  (Cisco 6500 blade) that I am trying to use Cat tools to backup the config files on a regular schedule. I have run into the following error when trying to run the activity:  "Did not receive expected response to command: configshow" and then Cat tools disconnects from the switch. I used telnet to issue the show running-config command and what I noticed is right after the show running-config command is issued the switch prompts with: "Press Enter to continue or <CTRL-Z> to abort"  or "--More-- or (q)uit " and sits there until there is user intervension. How can I automate the CR to continue command so I can use Cattools to pull the configuration of these switches? Any help would be greatly appreciated.

Thanks

↧

HP Procurve configuration backup using SSH problem

September 10, 2009, 6:49 am
$
0
0

Hello,

We have an HP Procurve J4903A Switch 2824 and it is integrated with RADIUS Server for authentication.
We are using Cat Tools 3.4 demo version and tried to configure the switch for configuraton backup using Method SSH2.
And using Device.Backup.Running Config  Type and SSH Username/Password are supplied. When Run the backup it shows the errors:
"Did not receive expected prompt when entering enable mode", and "Aborting: Unable to enter enable mode".

Do anybody faced this issue with SSH? Please help me to solve this problem.

Regards,

Achu

↧
Search

Cisco 6248 device backups

November 20, 2013, 6:44 am
$
0
0

Has anyone been able to create a device template to properly backup a Cisco UCS 6200 series fabric interconnect with CatTools?  There seems to be some threads about using NCM, but not for CatTools.

 

I was wanting to look at how the "Cisco.MDS.Fibre" script is done, but alas - these are encrypted, and I cant see anything useful.

↧
↧

Arris E6000 CMTS compare

August 15, 2014, 5:38 am
$
0
0

Hi Guys,

 

Newby Cattools user here, well I've used the free version many years ago now, but I now got the registared version :-)

 

Anyway I've managed to get Cattools to grab and compare configs for 3 Cisco Devices and Motorola CMTS, and i've even got it to grab and compare for my lab Arris E6000 CMTS (by using the Motorola CMTS script.

 

But every time the schedule runs the program detects changes in the E6000 config: -

 

show running-config show running-config 1
2 # ChassisType=<E6000> shelfName=<Arris CER CMTS> shelfSwVersion=<CER_V01.01.00.0135> timeGenerated=<Fri Aug 15 12:10:21 2014> # ChassisType=<E6000> shelfName=<Arris CER CMTS> shelfSwVersion=<CER_V01.01.00.0135> timeGenerated=<Fri Aug 15 12:16:25 2014>2
3 configure configure3
4 banner login banner login

 

How can I stop this? it's config line 2 "# ChassisType=<E6000> shelfName=<Arris CER CMTS> shelfSwVersion=<CER_V01.01.00.0135> timeGenerated=<Fri Aug 15 12:10:21 2014>" and the timeGenerated part that is causing the compare error.

 

Do I need a new script for this device?

 

BTW Arris now own the Motorola CMTS product range.

 

Best regards

Steve.

↧

UCS 6200 Fabric Interconnect Switches and Dell Force 10MXL with Cattools

August 4, 2016, 11:10 am
$
0
0

Has anyone been able to successfully back up UCS 6200 F/I  or Delll Force 10MXL switches using cattools?

If so, would it be possible to share the configuration that was used.

 

Thanks,

Dan

↧

Backup HP V1910 (Legacy 3Com 2928) switch

February 1, 2012, 7:18 am
$
0
0

I am trying to backup this switch using the Device.CLI.Send activity.  Here is what I am trying to send:

Login authentication　

Username:xxxx
Password:
<Raben Tire IT Switch>_cmdline-mode on
All commands can be displayed and executed. Continue? [Y/N]y

 

Please input password:******
Warning: Now you enter an all-command mode for developer's testing, some commands may affect operation by wrong use, please carefully use it with our engineer's direction.
<Raben Tire IT Switch>backup startup-configuration to 10.21.1.13
Backup next startup-configuration file to 10.21.1.13, please wait...
finished!
<Raben Tire IT Switch>quit

I get to the input of the password and get a syntax error.  Since I get a syntax error there, the rest of the script never runs, it also gets a syntax error.  How do I input a password at that point?

Thanks,
Jeff

 

 

↧

CatTools and Fortigate Firewalls

April 3, 2009, 3:14 am
$
0
0

Hi All,

I see that CatTools can backup Fortigate OS devices.  I have 10 or so Fortigate Firewalls which I'd like to backup.  But before I set this up I was trying to find out what commands CatTools issues to get the configuration just to check I'm not going to do any damage to my devices as they are hunreds of miles away from me.  I'm running ver 3.2.19.  Anyone have any idea or can point me in the right dorection to find out.

 

Thanks

Jimbo

↧
↧

Backup APC SmartUPS Network Management Card Config

November 2, 2010, 1:33 am
$
0
0

Hi!

Is there a chance that CatTools could retrieve the config.ini of a APC SmartUPS AP9617/AP9630 Network Management Card using FTP? It would be great if someone of the development team could have a look at it.

Here's a "capture" of a FTP session:

ftp> open 10.0.0.1
Connected to 10.0.0.1.
220 AP9617 Network Management Card AOS v3.7.3 FTP server ready.
User (10.0.0.1:(none)): admin
331 User name okay, need password.
Password:
230 User logged in, proceed.
ftp> bin
200 TYPE Command okay.
ftp> hash
Hash mark printing On  ftp: (2048 bytes/hash mark) .
ftp> get config.ini
200 PORT Command okay.
150 File status okay; about to open data connection.
#######################226 Closing data connection.
ftp: 47311 bytes received in 15,25Seconds 3,10Kbytes/sec.
ftp> close
221 Thank you for using APC products!
ftp> quit

Regards, Leonardo

↧

Script for HP/H3C Switches

September 26, 2012, 12:33 am
$
0
0

Hi!

 

I'm trying to backup the config of our new HP (H3C) Switches (5120, 5800, 10500). The script I created out of the Custom.Template is not working. The prompt of the switches is "<SWITCHNAME>", not "SWITCHNAME>" as in Ciscos IOS. So the script returns the error "Did not receive expected prompt when entering Enable mode".

Has anybody managed to create a script that works with the HP H3C switches?

 

Regards, lls71

↧
Search

Ubiquiti Device.ConnectivityTest.Login connection refused by remote host

July 20, 2016, 4:03 am
$
0
0

I am currently trying to set up KiwiCatTools to take a Device.Backup.Running Config of my current Microwave Links which are NanoBridge M5, I have CatTools working for Dell /Cisco and HP Switches.

Following the advice in this discussion Re: Automate backup of config from Ubiquiti NanoBridge M5 (DD-WRT) , I set the devices as Linux.RedHat.Bash and have double checked all usernames and passwords are correct and have also added the prompt fields that appear when using SSH to access the links.

Can ping all devices from CatTools but Device.ConnectivityTest.Login always fails.

Firmware on nanobridges is XM.v5.6.7.

Cattools 3.11 (enterprise)

 

Any help would be appreciated. Thanks in advance.

↧

Fail to connect

October 10, 2016, 10:11 am
$
0
0

Hi,

 

I'm setting up backup for a Cisco 3850x switch. Cattool responded "Failed
to connect to 192.168.10.10. Reason: (30012) Protocol version mismatch error..
Giving up after 3 connection attempts.

 

Would you know what's the exact issue here?

 

 

 

↧
↧

Problems Logging into HP Procurve switches running version 10.74 code.

February 2, 2010, 2:20 pm
$
0
0

When i use cattools to access my HP Procurve 2626 and 2650 Swiches, I get failures being caused by a inital login line that is not accounted for in the Cattools configuration. When you log into the switches you get a splash screen that says press any key to continue and then you get the login screen. HOw can I create a script to enter a character and wait so that Cattools can login correctly?  I ahve been told the splash screen can not be disabled. So when telnetting to the switch the 1st screen is not the username prompt.

↧

HP Procurve Switches - Compare running startup activity

September 28, 2010, 2:09 am
$
0
0

It would be great if you could add compare report activities on HP switches.

It should not be a big development as device is already supported with backup running configuration. All should be done is to adapt the command and the start of the startup configuration capture.

Command : show config

Output Result :

Startup configuration:

; ModelNumber Configuration Editor; Created on release #FirmwareVersion

line1
line2
....

↧

Invalid username or password - HP 6120 XG

August 2, 2016, 8:38 am
$
0
0

Hi  there,

 

I am running Cat Tools 3.3.17 and trying to backup all my device configs to one server.

 

I am having an issue with 2 HP switches - I receive a

Failed to connect to 172.x.x.x
  Reason: (30016) Invalid username or password reported by server, or bad
  private key.. Giving up after 3 connection attempts.

 

I am not too familiar with setting the device information - password, manager password etc. I have it for Direct connect via SSH2

 

Any help would be grateful!

 

G

↧
Viewing all 21331 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>