Has anyone been able to successfully back up UCS 6200 F/I or Delll Force 10MXL switches using cattools?
If so, would it be possible to share the configuration that was used.
Thanks,
Dan
↧
UCS 6200 Fabric Interconnect Switches and Dell Force 10MXL with Cattools
↧
Kiwi CAT Tools - Bintec/Funkwerk/Teldat Router
Hello,
we are using the Kiwi CAT Tools 3.6 to backup Juniper Routers but we have also Bintec/Funkwerk/Teldat routers in use.
Maybe anybody of you have already add this kind of Router and can give me the Script-File please?
Regards,
SSP Europe
↧
↧
Did any get Cattools 3.11 working with SonicWALL backups?
I have handful of SonicWALLs in field I need to do scheduled backup. However from what I can tell, the Cattools 3.11 still can not backup SonicWALL properly. Versions of the running SonicOS are 5.9 and newer.
Maybe it was my configuration issue...Here below are some screenshots.
Other tabs are defaults and I did not use Variants if that matters.
Thanks,
/S
↧
Ubiquiti Device.ConnectivityTest.Login connection refused by remote host
I am currently trying to set up KiwiCatTools to take a Device.Backup.Running Config of my current Microwave Links which are NanoBridge M5, I have CatTools working for Dell /Cisco and HP Switches.
Following the advice in this discussion Re: Automate backup of config from Ubiquiti NanoBridge M5 (DD-WRT) , I set the devices as Linux.RedHat.Bash and have double checked all usernames and passwords are correct and have also added the prompt fields that appear when using SSH to access the links.
Can ping all devices from CatTools but Device.ConnectivityTest.Login always fails.
Firmware on nanobridges is XM.v5.6.7.
Cattools 3.11 (enterprise)
Any help would be appreciated. Thanks in advance.
↧
Create a custom device in CatTools
I am working off of the How to create a custom device document. I save the Custom.device.template.ini to he /Devices folder and rename it to Custom.Ericsson.ATM.ini. I htem change the name to Custom.Ericsson.ATM under the [device] field and id to 4999. Under the [item_name] field i change default to Ericsson.ATM. I then save the file. Open up CatTools and try to add a new device. Then name of Custom.Ericsson.ATM or Ericsson.ATM does not show up. Is the document missing something as i am fairly certain i performed the steps a per the document.
Thanks
↧
↧
F5 backup error
Hi,
I am trying to backup F5 Big IP using kiwi cat tools. However i get error in Kiwi Cat tool as unexpected response for command b list.
Attached is the debug mode capture file.
I feel that script is waiting for prompt > however if we give list command in F5 it list configuration one page at a time and you have to press space bar many times until u reach end of config.
However need help fixing this.
↧
Using variables in custom CLI Script
I am trying to use the Device.CLI.send.commands activity to initiate a TFTP backup from a custom device.
I would like to use the hostname to name the tftp upload file. Can someone point me to how to do this.
The current script is:
netsave text-config 192.168.24.64 %hostname%-%date%.cfg
but this is not doing the variable substitution.
thanks
↧
Doc, KB and Getting Started
↧
Connect failed:(-32534) Disconnect : Protocol error
Hi,
I'm trying to run commands on Redback.router but i get this error :
Connect failed:(-32534) Disconnect : Protocol error
I use SSH2 Method and when i click Telnet/SSH from the device, it open the connection corectly with Secure-CRT (with SSH2..)
I'm running 3.10 version of the cattools.
do you know what could be the problem ?
thanks
↧
↧
Capture Serial Number from Cisco Router
We have 50 remote offices with Cisco 1801's. I have the exciting job of establishing their serial numbers :-/
Can kiwi help. I guess the output I'm after comes from the 'show inventory' command. Or is there a MIB which can be installed into Orion which can be run to do the same job. The information i'm specifically after is serial number.
↧
Custom Device prompts definition
I am currently evaluating Cat Tools but am running into problems with a custom device definition. we are using Alcatel-Lucent GPON equipment that uses TL1, the returned system prompts often span multiple lines causing problems in defining the proper prompts.
When I define a Device SendCLI Commands the defined instruction itself is executed properly but the scripts is waiting for the wrong prompt resulting in no data being captured although it is available.
<NEWSESSION CatTools 3.6.0 10-3-2011 12:28:58>
<PROTOCOL=SSH2>
<DEVICE TYPE=Alcatel.Lucent.OLT.TL1>
<ACTIVITY TYPE=Device.CLI.Send commands>
<ACTIVITY SCRIPT=C:\Program Files\CatTools3\Scripts\Client.Device.CLI.Send commands.txt>
<USERS NAME FOR DEVICE=Albrandswaard OLT>
<C OK 12:29:00><R-12:29:04>[27][;r[00][00][27][?6l[00][27][?7l[00][27][20l[00][27][4h[00][00][00][00][27][?3l[00][00][00][00][00][00][00][00][00][00][00][17][13][10]< <W-12:29:04>[13]<R-12:29:04>[13][10]<R-12:29:05>[13][10]IP 0[13][10][13][10]Welcome to FTTU[13][10][13][10][13][10] /* A L C A T E L - L U C E N T <R-12:29:05> */[13][10][13][10][13][10] OONO-ALBW-0001 11-03-10 12:29:13[13][10]M 0 COMPLD[13][10] /* act-user */[13][10] /* Alcatel-Lucent FTTU : This is a private computer system. */[13][10] /* Unauthorized access or use may lead to<R-12:29:05> prosecution. */[13][10] /* last successful login: 10/03/11 12:25:29 */[13][10] /* 2 User(s) Logged On */[13][10];[13][10]<R-12:29:05>[13][10][13][10]/* HELP MENU[13][10][13][10] HELP or ? Type HELP or ? for this menu.[13][10] MENU Type MENU for menu mode.[13][10] <UP ARROW> or '^B' Recall previous commands.[13][10] <DOWN ARROW> or '^N' Recall successive <W-12:29:05>RTRV-ONT::ONT-1-1-1-2-63::<R-12:29:05>commands.[13][10] <LEFT ARROW> or '^D' Move cursor left one space.[13][10] <RIGHT ARROW> or '^F' Move cursor right one space.[13][10]<R-12:29:06> '^E' Move cursor to end of line.[13][10] '^A' Move cursor to start of line.[13][10] <CAN> or '^X' Reset command input processing.[13][10] <BS> or '^H' Delete previous input character.[13][10] <DEL> <R-12:29:06> Restart current line input. */[13][10][13][10]< [13][10]<R-12:29:06>[13][10]/* No command code entered. */[13][10]Enter Verb[13][10] (ACT, ALW, CANC, DGN, DL, DLT, ED, ENT, INH, INIT,[13][10] LOGOFF, OPR, RD, REPT, RLS, RST, RTRV, SEND, SET, STA,[13][10] STP, SW, UL) : R<R-12:29:06>TRV-ONT::ONT-1-1-1-2-63::<W-12:29:06>[13]<R-12:29:07>[13][10][13][10]RTRV-ONT::ONT-1-1-1-2-63:: [13][10]Execute ? (Y,N) [Y] : <W-12:29:07>y[13]<R-12:29:07>y[13][10]<R-12:29:07>[13][10]<R-12:29:07>IP 0[13][10][13][10]< <W-12:29:08> <R-12:29:08>[13][10][13][10] OONO-ALBW-0001 11-03-10 12:29:16[13][10]M 0 COMPLD[13][10] /* RTRV-<R-12:29:08>ONT::ONT-1-1-1-2-63:: */[13][10] "ONT-1-1-1-2-63::BTRYBKUP=NO,BERINT=8000,DESC1=\"50MBInet\",[13][10] DESC2=\"Slotvdijk3A\",PROVVERSION=\"*\",SERNUM=ALCLF9AD56B9,[13][10] SUBSLOCID=\"WILDCARD\",SWVERPLND=\"3FE52258AFYA12\",FECUP=ENABLE,[13][10] SCHEDPROFID=1,SCHEDPROFNM=\<R-12:29:08>"defSubSchedProf\",POWERSHEDPROFID=0,[13][10] POWERSHEDPROFNM=\"NULL\",ONTENABLE=AUTO,P2PENABLE=DISABLE,[13][10] RATELIMITOPT=ENABLE,OPTICSHIST=DISABLE,PLNDVAR=\"\",[13][10] DLSW=\"3FE52258AHCA27\",EQPTVERNUM=3FE51880AAAB01,SWVERACT=3FE52258AFYA12,[13][10] SWVERPSV=3FE522<R-12:29:08>58AHCA27,VENDORID=ALCL,EQUIPID= I241GB,NUMSLOTS=3,[13][10] NUMTCONT=31,NUMTRFSCH=31,NUMPQ=31:IS-NR"[13][10];[13][10][13][10]< <R-12:29:09>
================================================================================
WFMDRetVal=1 Waiting for: "IP 0"
WFMDRetVal=2 Waiting for: "/* The command code entered is not a valid command code. */"
WFMDRetVal=3 Waiting for: "/* The command code entered is not a valid command code. */"
WFMDRetVal=4 Waiting for: "Execute ? (Y,N) [Y] :"
Below is the prompt that the script is waiting for but that will never occur
WFMDRetVal=8 Waiting for: " <DOWN ARROW> or '^N' Recall successiv<"
Below is the returned data that is in essence entirely correct!
WFMDBuffer="[13][10][13][10] oono-albw-0001 11-03-10 12:29:16[13][10]m 0 compld[13][10] /* rtrv-ont::ont-1-1-1-2-63:: */[13][10] "ont-1-1-1-2-63::btrybkup=no,berint=8000,desc1=\"50mbinet\",[13][10] desc2=\"slotvdijk3a\",provversion=\"*\",sernum=alclf9ad56b9,[13][10] subslocid=\"wildcard\",swverplnd=\"3fe52258afya12\",fecup=enable,[13][10] schedprofid=1,schedprofnm=\"defsubschedprof\",powershedprofid=0,[13][10] powershedprofnm=\"null\",ontenable=auto,p2penable=disable,[13][10] ratelimitopt=enable,opticshist=disable,plndvar=\"\",[13][10] dlsw=\"3fe52258ahca27\",eqptvernum=3fe51880aaab01,swveract=3fe52258afya12,[13][10] swverpsv=3fe52258ahca27,vendorid=alcl,equipid= i241gb,numslots=3,[13][10] numtcont=31,numtrfsch=31,numpq=31:is-nr"[13][10];[13][10][13][10]< "
================================================================================
<W-12:29:39>logoff;[13]<D 12:29:39>
<SCRIPT VALUES>
<HOSTNAME=" <DOWN ARROW> or '^N' Recall successiv">
<PROMPT VTY=" <DOWN ARROW> or '^N' Recall successiv<">
<PROMPT ENABLE="">
<PROMPT CONFIG="">
The prompt that the script is waiting for is inadvertedly picked up during logging in to the system, reason is that the default system prompt is "<" that is also returned as part of the logon banner.
Below the propperly formatted systembanner after successful logon:
<
IP 0
Welcome to FTTU
/* A L C A T E L - L U C E N T */
OONO-ALBW-0001 11-03-10 12:58:44
M 0 COMPLD
/* act-user */
/* Alcatel-Lucent FTTU : This is a private computer system. */
/* Unauthorized access or use may lead to prosecution. */
/* last successful login: 10/03/11 12:58:08 */
/* 1 User(s) Logged On */
;
/* HELP MENU
HELP or ? Type HELP or ? for this menu.
MENU Type MENU for menu mode.
<UP ARROW> or '^B' Recall previous commands.
<DOWN ARROW> or '^N' Recall successive commands.
<LEFT ARROW> or '^D' Move cursor left one space.
<RIGHT ARROW> or '^F' Move cursor right one space.
'^E' Move cursor to end of line.
'^A' Move cursor to start of line.
<CAN> or '^X' Reset command input processing.
<BS> or '^H' Delete previous input character.
<DEL> Restart current line input. */
<
Is there a way arround this problem? Additionally, a lot of the returned prompts contain the current date/time making testing for specific prompts difficult if not impossible, is it possible to use wildchards in the prompt definitions or otherwise instruct Cat Tools to ignore specific parts of the returned prompts?
Regards,
Henk
↧
Ubiquiti Device.ConnectivityTest.Login connection refused by remote host
I am currently trying to set up KiwiCatTools to take a Device.Backup.Running Config of my current Microwave Links which are NanoBridge M5, I have CatTools working for Dell /Cisco and HP Switches.
Following the advice in this discussion Re: Automate backup of config from Ubiquiti NanoBridge M5 (DD-WRT) , I set the devices as Linux.RedHat.Bash and have double checked all usernames and passwords are correct and have also added the prompt fields that appear when using SSH to access the links.
Can ping all devices from CatTools but Device.ConnectivityTest.Login always fails.
Firmware on nanobridges is XM.v5.6.7.
Cattools 3.11 (enterprise)
Any help would be appreciated. Thanks in advance.
↧
Fortigate With Vdom backup is not happening
Hi All ,
I am not able to take the backup of Fortigate which has configured on VDOM environment .
Some Fortigate's I am able to take but Vdom configuration's are missing from the Backup .
Did any one faced this issues and what was the solutions you found on Kiwi Cat tools
Please help thanks in advance
Regards
Vineeth
↧
↧
Script for HP/H3C Switches
Hi!
I'm trying to backup the config of our new HP (H3C) Switches (5120, 5800, 10500). The script I created out of the Custom.Template is not working. The prompt of the switches is "<SWITCHNAME>", not "SWITCHNAME>" as in Ciscos IOS. So the script returns the error "Did not receive expected prompt when entering Enable mode".
Has anybody managed to create a script that works with the HP H3C switches?
Regards, lls71
↧
Latest Cattools on SG300 switches?
Can the latest RC of Cattools perform config backups on Cisco Small Business SG300 switches? We are having a hard time getting this working over SSH with TACACS.
↧
CatTools and SonicWall 6.2
Trying to get my SonicWall firewall NSA5600 config to back up via CatTools. Seems that everything I try doesn't work. It's trying to enter the wrong commands for displaying the current config.
Anyone else having these issues?
↧
HP procurve problem
Hi all
can you please help me with the attached debug file
i am using kiwi cattools V3.10.0 and entered the AAA username and AAA password only
↧
↧
HP Comware 7 Switches
I have been using CatTools successfully with Cisco and HP Procurve switches for some time now, but I can't get the software to successfully talk to a new Comware switch. Looking at the debug logs it looks like it isn't coping with the default Comware prompt format e.g. <sysname> or [sysname] for user or system view respectively. Any idea what I need to do to get it to work?
Thanks
iain
ps I have logged a call with SolarWinds but this is proving to be a soul destroying process. The case is flagged as not started after two days, I've left answer phone messages to no avail and listened to muzak for far too long.
↧
Cattols 3.10 to FortiOS 5.2.5 or 5.4 doesn´t work
Hi,
since we upgraded to FortiOS 5.2.5 or 5.4 Cattools gives us the error message "Failed to connect to XXX. Reason: No respone from remote host. Will try again."
If we connect to it with Putty we get a session.
Have debugged the SSH from FortiOS but no error messages is shown.
The debug in Cattools doesn´t give any errors either:
<NEWSESSION CatTools 3.10.0 2016-01-15 08:41:31>
<PROTOCOL=SSH2>
<DEVICE TYPE=Fortinet.FortiOS.General>
<ACTIVITY TYPE=Device.Backup.Running Config>
<ACTIVITY SCRIPT=D:\Program Files (x86)\CatTools3\Scripts\Client.Device.Backup.Running Config.txt>
<USERS NAME FOR DEVICE=nbo-osd2fw01>
<D 13:48:31>
<SCRIPT VALUES>
<HOSTNAME="">
<PROMPT VTY="">
<PROMPT ENABLE="">
<PROMPT CONFIG="">
We have tried all different SSH ciphers but with the same result. When we save the ciphers we can see that it sends it to the FortiOS and that it accept it.
Any ideas?
Robin
↧
Need custom prompt for Cisco Wireless Lan Controller WLC2100
First prompt is the following:
login as: admin
Then the next prompt is the following:
User:admin
Password:
(Cisco Controller) >
Normally there is no "Login as:" prompt
They drop you straight to a User: prompt.
Also uses SSH2 for the connection.
↧