Is is possible to get a template updated for a longer timeout? I had to upgrade my 5508 last night and the tftp upload takes longer. Captured the errors I was getting using a setup that worked the night before. After answering "y" to a prompt, cattools does not get the expected response within 30 seconds. I don't know how fast tftp uploads occurred before my upgrade, but it takes 85 seconds now. Anyway to get a template with a 120 second timeout? This is part of the output that seems to indicate the issue:
================================================================================
WFMDRetVal=1 Waiting for: "--More--"
WFMDRetVal=2 Waiting for: "Incorrect usage"
WFMDRetVal=3 Waiting for: "% Incomplete command"
WFMDRetVal=4 Waiting for: "(y/n)"
WFMDRetVal=5 Waiting for: "Press Enter to continue"
WFMDRetVal=18 Waiting for: "(Cisco Controller) >"
WFMDRetVal=19 Waiting for: "(Cisco Controller) #"
WFMDRetVal=20 Waiting for: "(Cisco Controller) config>"
WFMDBuffer="y[13][10][13][10]tftp config transfer starting.[13][10]"
================================================================================
<W-9:19:17 AM>[13]
================================================================================
WFMDRetVal=1 Waiting for: "(Cisco Controller) >"
WFMDRetVal=2 Waiting for: "(Cisco Controller) #"
WFMDRetVal=3 Waiting for: "(Cisco Controller) config>"
WFMDRetVal=4 Waiting for: "(config)"
WFMDBuffer=""
================================================================================
<W-9:19:47 AM>logout[13]<D 9:19:47 AM>
<SCRIPT VALUES>
<HOSTNAME="(Cisco Controller) ">
<PROMPT VTY="(Cisco Controller) >">
<PROMPT ENABLE="(Cisco Controller) #">
<PROMPT CONFIG="(Cisco Controller) config>">
Thanks,
Dennis
