When trying to run an ARP table report against the Nexus platform, the report fails. The Info Log shows "Unable to find the title line in router ARP table" and then follows with the line "No ARP data available."
Any ideas on how to work around this? The output from other Cisco equipment was in the format of the following:
#show arp
ARP Aging time = 1200 sec
+ - Permanent Arp Entries
* - Static Arp Entries
default at 00-00-00-00-00-00 on vlan 0
DNSName1.domain.com at 00-00-00-00-00-01 port 1/2,3/1 on vlan 214
DNSName1.domain.com at 00-00-00-00-00-02 port 1/2,3/1 on vlan 214
192.168.1.1 at 00-00-00-00-00-04 port 1/2,3/1 on vlan 214
192.168.1.2 at 00-00-00-00-00-05 port 1/2,3/1 on vlan 214
On the NEXUS, it looks like this:
# show ip arp # yes, I tried changing the command in the activity
Flags: * - Adjacencies learnt on non-active FHRP router
+ - Adjacencies synced via CFSoE
# - Adjacencies Throttled for Glean
D - Static Adjacencies attached to down interface
IP ARP Table for context default
Total number of entries: 7
Address Age MAC Address Interface
192.168.1.12 00:03:13 0000.0000.0001 Vlan925
192.168.1.13 00:11:25 0000.0000.0002 Vlan925
192.168.1.14 00:05:25 0000.0000.0003 Vlan925
192.168.1.15 00:06:21 0000.0000.0004 Vlan925
192.168.1.16 00:02:01 0000.0000.0005 Vlan901
192.168.1.17 00:00:49 0000.0000.0006 Vlan901
192.168.1.18 00:00:47 0000.0000.0007 Vlan901